Determination of Palladium concentration in Pd-Ni recovery water

The analysis allows the quantification of Pd in Pd-Ni recovery waters. Monitoring the concentration of palladium in the water used for washing galvanized parts allows optimizing the recoveries of this valuable. This is particularly useful in order to reduce possible economic losses by companies, especially given the high costs of this raw material.

Method

Test type: End Point.

Testing time: 4 minutes.

Analysis sessions with multiple samples are possible up to a maximum of 16 tests for CDR GalvanLab® and 3 tests for CDR GalvanLab® Junior.

Passo 1
Step 1/14
Place the test tubes containing reagent R1 in one of the incubation cells and let them warm for at least 5 minutes.
Passo 2
Step 2/14
Collect 100 µL of sample with a pipette. Use a new tip for each test to prevent contamination from previous samples.
Passo 3
Step 3/14
Carefully clean the outside of the pipette tip with blotting paper, avoiding contact between the extremity of the tip and the paper.
Passo 4
Step 4/14
Place the sample in the cuvette. Keeping the tip immersed in reagent, press and release the piston of the pipette several times.
Passo 5
Step 5/14
Gently shake the cuvette 2-3 times.
Passo 6
Step 6/14
Place the cuvette in one of the incubation cells and start the timer by pressing the timer icon.
Passo 7
Step 7/14
Gently shake the cuvette 2-3 times.
Passo 8
Step 8/14
Select the cuvette to be read from the display. Place the cuvette in the cell marked with the blue light and press READ.
Passo 9
Step 9/14
Collect 50 µL of R2 with the pipette.
Passo 10
Step 10/14
Add 50 µL of R2 to the cuvette without touching the tip in the liquid, R1 + sample. In case of contamination, replace the tip.
Passo 11
Step 11/14
Gently shake the cuvette 2-3 times.
Passo 12
Step 12/14
Place the cuvette in one of the incubation cells and start the timer by pressing the timer icon.
Passo 13
Step 13/14
Gently shake the cuvette 2-3 times.
Passo 14
Step 14/14
Place the cuvette in the cell marked with the blue light and press READ to perform the photometric reading.
7%

Sample treatment

The sample can be used as is.

Principle of the test

Palladium content is determined by its reaction with a chromogen that develops a coloration, the optical intensity of which is proportional to the concentration of Pd in the analyzed sample.

Calibration curve

Calibration curve was obtained by correlating the CDR method with the reference method.

Palladium Analysis in Pd-Ni Baths: Calibration Curve of the CDR GalvanLab® instrument with the reference method.

Reagent test Kits

Code *400010: 100 test
Code *400015: 10 test
The reagents have a shelf-life of 12 months

Measuring range

AnalysesMeasuring rangeResolutionRepeatability
Palladium PdNi recovery [0.15-1] g/L0.15 - 1 g/L0.010 g/L0.02 g/L

The chemical analysis instruments for electroplating baths

CDR GalvanLab®

  • Complete analysis panel, supplied already configured
  • Up to 16 determinations simultaneously
  • Possibility of carrying out analyses of the same sample
  • Integrated printer
  • Full connections (LAN - USB - Bluetooth barcode/QR code reader)

CDR GalvanLab® Jr

  • Partial analysis panel, customisable configuration
  • Up to 3 determinations simultaneously
  • Wireless connection to external printer
  • USB connections
Compare